Here are the general specifications for a 1 HP centrifugal pump (typical for water applications). Actual specs may vary by model and manufacturer:
Power Rating: 1 HP (Horsepower) ≈ 0.75 kW
Voltage:
Single-phase: 115V / 230V (common for residential use)
Three-phase: 208V / 230V / 460V (industrial use)
Phase: Single-phase or Three-phase (depends on model)
Current (Amps): ~4-8 A (at 230V, single-phase)
Frequency: 50 Hz or 60 Hz (region-dependent)
Flow Rate (Capacity): ~10–50 GPM (Gallons Per Minute) (~2–10 m³/hr)
Head (Pressure):
Max Head: ~50–100 ft (~15–30 meters)
Working Head: Typically 20–60 ft (~6–18 meters)
Efficiency: ~50–70% (depends on design)
Suction Lift: ~20–25 ft (for self-priming models)
Pump Type: Centrifugal (single-stage or multi-stage)
Impeller Material:
Plastic (PP, Noryl) – for light-duty use
Cast Iron / Stainless Steel – for heavy-duty/industrial use
Housing Material:
Cast Iron (common)
Stainless Steel (corrosion-resistant)
Thermoplastic (for chemical resistance)
Shaft Seal:
Mechanical Seal (standard)
Lip Seal (cheaper, less durable)
Inlet/Outlet Size:
1" or 1.25" (residential)
1.5" or 2" (industrial)
Speed (RPM):
2900 RPM (high-speed, higher head)
1450 RPM (low-speed, quieter, more efficient)
Max Liquid Temperature: ~140°F (60°C) for standard models
Self-Priming: Yes/No (depends on model)
Duty Cycle: Continuous duty (for most models)
Domestic: Water supply, irrigation, boosting pressure
Industrial: Cooling systems, light chemical transfer
Agricultural: Livestock watering, small-scale irrigation
IP Rating: IP55 (water and dust protection)
NEMA Standards: (if applicable for motor)
CE / UL / ISO Certified (varies by manufacturer)
The above content is compiled and published by Zhilong Drum Pump supplier, please specify, to buy oil drum pump, electric drum pump, high viscosity electric drum pump, fuel drum pump, food grade drum pump and so on, please contact us.