首页 > Product > Electric speed control oil drum pump

Electric speed control oil drum pump

HD-E2-V+PPHT-700 55 Gallon Plastic Drum Pump

HD-E2-V+PPHT-700 55 Gallon Plastic Drum Pump

Product Model： HD-E2-V+PPHT-700
Motor Performance： Electric speed control
Material： PPHT plastic
Brand： Zhilong
Lift： 10m
Flow rate： 165L/min
Power： 880W
Pump pipe diameter： 42mm
Outlet diameter： 25mm
Viscosity： 1000CPS
Instant Quote

Drum Pump Introduction：

Drum Pump is a kind of barrel pump. The tube can be directly put into the drum to pump liquid. As per different transferring liquid, the pump wet part can choose Aluminum Alloy, Stainless Steel, PP, RPP, PVDF, PTFE Material. The driving motor can be single phase common motor, Ex-proof motor, no brush motor &high-speed motor for option. It is easy to use, maintenance &high efficiency. It is widely used to transfer acid, petrochemical liquids, treatment water, drinks, gas, kerosene, diesel and some low-viscosity liquids in extensive fields of petrochemical, refinery, food, petro oil, marine, pharmacy, filling station etc.

Drum Pump Application：

1.Chemical: Acid and alkaline substances, high corrosive and toxic substances, solutions, oils, lotions etc.

2.Petrochemical: All kinds of oil, gasoline, kerosene, diesel oil, oil for aviation in oil warehouse, oil station, oil tanker, refineries, gas station etc.

3.Fine chemical: Adhesives, coatings, surfactants, spices, auxiliaries, dyes, catalysts etc.

4.Dyes and chemical industry: Paints, pigment, glue and adhesive etc..

5.Environmental protection : Sewage, waste oil, waste water, fuel oil, ship sewage, water and oil mixture , farm machinery station enterprises and institutions etc.

6.Food sector : Juice, syrup, calcium carbonate emulsion, high pressure water, food additives, alcohol etc.

Drum Pump Performance：

Max. temperature	100℃(212℉)
Max. viscosity	1200CPS
Max. power	800W
Max. speed	10000r/min
Max. flow rate	165L/min
Max. head	28m
Pump tube length	700mm(27''), 1000mm(39"), 1200mm(47"), 1500mm(60")
Pump tube material	PPHT - Polypropylene	Acid and alkaline substances, like acetic acid, ammonium, sodium hydroxide.
	PVDF - Polyvinylidene Fluoride PVDF	Highly corrosive and toxic substances, like hydrofluoric acid, sulfuric acid, nitric acid, sodium hypochlorite
	SS - Stainless Steel 304 or Stainless Steel 316L	Flammable or inflammable substances: diesel oil, gasoline, all kinds of oil, inhibiting agents and alcohol.
	AL - Aluminum Alloy	Weakly corrosive sewage, diesel oil, low-viscosity oil and lubricating oil.

drum pump parameter table：

Motor Type	Product Model	Flow rate Litres/minute	Maximum lift metres	Power W	Rotation speed r/min	pump tube Diameter	Outlet Diameter	Pump hose Material	Temperature resistance (degrees)	Applicable Viscosity	Shaft Materia	applicability specific gravity
Ordinary speed control motor	HD-E2-V+AL-□	165	10	800	10000	41mm	25	AL aluminium alloy	100	1000 CPS	SS304	<1.8
	HD-E2-V+AL-□HP	100	28	800	10000	41mm	25	AL aluminium alloy	100	1200 CPS	SS304	<1.8
	HD-E2-V+SS304-□	165	10	800	10000	42mm	25	Stainless steel SS304	100	1000 CPS	SS304	<1.8
	HD-E2-V+SS304-□HP	100	28	800	10000	42mm	25	Stainless steel SS304	100	1200 CPS	SS316LSS316L	<1.8
	HD-E2-V+SS316L-□	165	10	800	10000	42mm	25	Stainless steel SS316L	100	1000 CPS	SS316L	<1.8
	HD-E2-V+SS316L-□HP	100	28	800	10000	42mm	25	Stainless steel SS316L	100	1200 CPS	SS316L	<1.8
	HD-E2-V+PPHT-□	165	10	800	10000	41mm	25	PPHT	80	1000 CPS	SS316L	<1.8
	HD-E2-V+PPHT-□HP	100	28	800	10000	41mm	25	PPHT	80	1200 CPS	SS316L	<1.8
	HD-E2-V+PVDF-□	165	10	800	10000	41mm	25	PVDF	100	1000 CPS	Hastelloy	<1.8
	HD-E2-V+PVDF-□HP	100	28	800	10000	41mm	25	PVDF	100	1200 CPS	Hastelloy	<1.8
Explosion-proof air motors	HD-A1+AL-□	100	7	370	9500	41mm	25	AL aluminium alloy	100	300 CPS	SS304	<1.8
	HD-A1+AL-□HP	60	13	370	9500	41mm	25	AL aluminium alloy	100	700 CPS	SS304	<1.8
	HD-A1+SS304-□	100	7	370	9500	42mm	25	Stainless steel SS304	100	300 CPS	SS304	<1.8
	HD-A1+SS304-□HP	60	13	370	9500	42mm	25	Stainless steel SS304	100	700 CPS	SS304	<1.8
	HD-A1+SS316L-□	100	7	370	9500	42mm	25	Stainless steel SS316L	100	300 CPS	SS316L	<1.8
	HD-A1+SS316L-□HP	60	13	370	9500	42mm	25	Stainless steel SS316L	100	700 CPS	SS316L	<1.8
	HD-A1+PPHT-□	100	7	370	9500	41mm	25	PPHT	80	300 CPS	PPHT	<1.8
	HD-A1+PPHT-□HP	60	13	370	9500	41mm	25	PPHT	80	700 CPS	PPHT	<1.8
	HD-A1+PVDF-□	100	7	370	9500	41mm	25	PVDF	100	300 CPS	Hastelloy	<1.8
	HD-A1+PVDF-□HP	60	13	370	9500	41mm	25	PVDF	100	700 CPS	Hastelloy	<1.8